Tents For Camping: Guides and Advice

The hiking tent (2 or 3 places) must be lightweight (between 2 and 3.5 kg), compact, easy and fast assembly.

Today, the most suitable models are:
– Igloo tents: 2-3 seats, from 2.2 Kg to 3.5 Kg. Also in polyamide.
– profiled, taller and wider in front than behind, accommodating 2 or 3 people. They weigh between 1.8 and 2.8 kg.
– super light domes or tunnels (weighing between 2 and 2.9 kg): Helsport models, The North Face, Lafuma, James …

These tents are either entirely made of nylon or lined with cotton on the inside, with a roof nylon. They are compact and easy to install.
Prices vary depending on the materials used (polyester or polyamide, fiber or alloy hoops) and their manufacture. They range from 200 to 500 dollars. These models are only suitable for active hiking. Their living space is reduced. The more versatile models are domes or tunnels with advanced, more spacious than Canadian but also heavier. Moreover, their choice is very wide. The simple and low-end models are not hiking tents but tents called “extra” for easy use and trouble-free. As soon as you are subjected to more severe weather (rain, wind, etc.), it is better to opt for better-built models.

The materials used: the roof is made of polyester and the alloy arches (the fiber is heavier and more fragile). The inner tent is either breathable nylon or cotton or polycotton and comfortable size (about 130-150 cm wide by 200-205 cm deep). The advanced or apses, which measure between 70 and 80 cm, allow storage of camping equipment. The floor mats must not be too light in order to be able to withstand the difficulties of the ground.

The best models have seams made waterproof by thermo-welded bands. Depending on the type of advance, weights range from 2.9 to 3.8 kg (in 2-3 places) and prices range from 140 to 600 dollars.

Other gear

If you are looking for a tent then surely you are going on a camping trip. You should check out some best tactical gear reviews and get some other products that will help you to enjoy your camping in the woods.

Toilet Spray Valve Plumbing Problems


Most homeowners have no idea how to fix the toilet spray valve and end up calling a professional like Dallas Plumbing. This is fine but, spending money on the repair is not ideal. It is actually quite easy to repair the toilet spray valve, you can do it on your own in less than a couple of hours.

First, remove the tank lid from the toilet, which may be on the top of the tank or on the back depending on the design of your bathroom. Remember to place the lid properly to one side, since most designs are made of heavy ceramic and it would be a major problem to replace a broken lid.

Look at the parts to determine where the problem is. You can start by pressing the discharge lever. It is likely that you can repair the valve simply by attaching the chain connecting the discharge lever to the valve that allows the water to flow into the main toilet bowl when pulling the chain.

If the chain is intact, check the valve, which is usually made of rubber and is the one that seals the hole through which the water escapes. This is known as a rubber or rubber valve. Make sure it is sealing the entire hole and that the tank is filled, otherwise you will need to replace the valve.

Most hardware stores have these valves. To find the indicated spare part, take a photo or the same valve to the hardware store. Take note of the brand, so it will be easier to purchase replacement parts from the manufacturer.

Other owners after repairing their toilet valve choose to replace them with more modern alternatives, especially if the old valve is already old. Most valves are damaged or malfunctioning as time passes due to mineral deposits from the water. The valves of the toilets also stop working due to the accumulation of dust and dirt, product of poor maintenance.

The best advice is to regularly clean not only the exterior of your toilet but the inside of the tank as well. Not only will it prevent future damage, but it will also ensure that the water used is clean.

There is nothing like a running toilet and very clean bathroom.

How To Cut Wood Properly

Have you ever needed to know which saw is the right one for each type of job? Or even how to use it? Tools make cutting the wood less complicated, faster and more accurate. If used properly and with care, they can be a huge advantage when starting a new project with wood.

There are a variety of saws you can use to cut wood. This article is full of tips that will help you along the way and is a useful guide on some of the types of saws out there.

Use a circular saw

These types of saws are used to cut wood, medium density fiberboard, wood blocks, and chipboard. The cuts are very good and accurate. As with the jigger, the cut itself is made when the leaves are raised up through the wood, so the cleaner side will remain at the bottom.

When making a new cut place the lacquered surface of the wood on a stool to make sure that the cutting area is clear and that you do not cut through what you do not want to cut.  It’s important to note that circular saws won’t be as good as table saws.  The Dewalt dwe 7491rs, for example, will cut better than any circular saw on the market.

Use a jigsaw

You can place different sheets to cut different types of solid wood like plywood, and also the table. The jigsaws are specifically designed for wood cutting. It can produce straight or curved cuts.

When generating a cut, position the wood on the stool and make sure the cut area is clear so you do not cut anything you do not want to cut.

This saw makes cuts by raising the edge through the wood, which means that the cleaner side will be on the underside. Keep this in mind when placing the wood you want to cut, especially when cutting lacquered solid wood or with a surface of melanin.

The jigsaws usually have adjustable speed ranges and are available with the ability to expel dirt to the air, dust removal and also with an interchangeable base for your convenience.